<output id="ssr50"><legend id="ssr50"><var id="ssr50"></var></legend></output>
  1. 国产免费久久爱久久啪,国产免费久久啪久久爱,国产免费啪视频在线观看

    Email:sales@bundor.com    |   Tel: +86 150 0225 9955   |   Wechat: Bundor_marketing   |    Skype: +86 150 0225 9955

    Home ? News ? Valve Knowledge

    The difference between ball valve and gate valve

    Posted by Bundor valve
    A friend asked the editor what is the difference between a ball valve and a gate valve. In fact, this topic is very simple for people who know valves. First of all, their appearance is completely different. In this article, we will not talk about such superficial things. Bundor Valves will take you to understand the difference between ball valves and gate valves.

    Spool structure
    The valve core of the ball valve is a sphere. Due to the structure of the fixed ball, the valve ball is fixed under high pressure, especially in the closed state, and the upper valve stem and the lower support shaft decompose part of the pressure from the medium, so The valve ball does not offset downstream, so the pressure on the downstream valve seat is relatively small, so the friction force that the valve overcomes when acting is small, the valve seat wear is small, and the service life of the valve is long, especially for valves that operate frequently. This structure is more suitable.
    The valve core of the gate valve is a wedge-shaped valve plate or a parallel valve plate. The lower part has no fulcrum. Therefore, when the valve is under high pressure application and in the closed state, the valve plate bears a great pressure from the medium, and due to its flat valve plate structure, all the medium pressure acts on the valve plate at the same time, then the valve plate It will press firmly to the downstream valve seat (at the same time, excessive pressure acts on the vertical surface of the valve plate, which will cause the valve plate to be deformed to a certain extent, whether it is a wedge or parallel double gate), then the valve is opened. When a great friction force needs to be overcome, the wear of the valve seat will result in a short life of the valve.
    Valve seat structure
    There is a spring inside the valve seat of the ball valve, and the sealing design of the valve seat makes it difficult for the dregs in the medium to enter the valve seat. The valve seat is in contact with the valve ball for a long time under the action of the spring. When the valve moves, the valve seat has a certain scraper function, which can scrape off the dross attached to the valve core after long-term operation, which can ensure the sealing performance of the valve for a long time. . Especially in the application of high temperature and high pressure, due to the selection of the material of the valve seat, valve body and valve ball with the same thermal expansion coefficient, as well as the valve seat of the spring structure, when the valve is closed, there is a huge temperature difference and temperature drop. , it will not affect the action of the valve, and the valve will not lock up.
    The valve seat of the gate valve is very narrow. In high temperature applications, when the valve is closed, the temperature drops because the medium does not flow, so the valve seat will be compressed, resulting in a large pressing force on the valve plate. When the valve is opened again, a large torque is required to overcome this pressing force, which will cause great damage to the valve seat and affect the life of the valve seat. Thus affecting the service life of the valve. In addition, due to the self-weight of the gate itself when the valve is closed, it will bring a great impact to the valve and cause a lot of noise.
    Itinerary
    The stroke of the ball valve is an angular stroke, so the installation space is small and the height is low. The stroke of the gate valve is a straight stroke, so the installation space is large and the height is high.
    Executive body
    Due to the fixed ball design, the opening and closing torque of the ball valve is small, so the actuator is correspondingly small. Due to the large pressing force of the valve plate on the valve seat, the gate valve needs a large torque to overcome this large friction force, and the actuator is equipped with a large amount.
    Maintenance
    Ball valves generally do not need maintenance, especially the valve ball and valve seat, due to small wear, generally do not need to be replaced within 5 years. Due to the large wear of the valve seat, the gate valve needs regular maintenance.