<output id="ssr50"><legend id="ssr50"><var id="ssr50"></var></legend></output>
  1. 国产免费久久爱久久啪,国产免费久久啪久久爱,国产免费啪视频在线观看

    Email:sales@bundor.com    |   Tel: +86 150 0225 9955   |   Wechat: Bundor_marketing   |    Skype: +86 150 0225 9955

    Home ? News ? Valve Knowledge

    What are the characteristics of gate valves

    Posted by Bundor valve
    Gate valves are used to cut off the flow of media in the pipeline.Although the structure of gate valve is not as simple as butterfly valve, but also not complex, with a body, bonnet, stem, gate, sealing ring and transmission device composition.Our common gate valve drives are handwheels or electric actuators, which are usually used in some special operating conditions.Gate valves can only be fully open or fully closed, sealing better than butterfly valves.In addition, what other features do gate valves have?
    gate valve
    Gate valve characteristics

    1. Low flow resistance.The media passage in the gate valve body is straight through. When the valve is fully open, the flow resistance of the media through it is negligible and very small.

    2. Opening and closing saves effort.When the gate valve is switched, the motion direction is perpendicular to the motion direction of the flowing medium in the valve body channel, so it is more labor-saving to open and close.

    3. Two-way circulation.Gate valves are two-way flow, medium flow is not limited by the direction of installation, so gate valves are suitable for installation in pipelines where the flow direction of medium may change.

    4. Good sealing performance.Gate valve seal belongs to forced seal, its sealing performance is better than butterfly valve.

    5. Long opening and closing time.The height of the gate valve is large. When opening, the gate should rise to the upper part of the valve channel completely, and when closing, the gate should be lowered to block the valve channel completely.In this process, the need to spend more opening and closing time.